Nalco 2593 Msds Fixed – Best

Material Safety Data Sheet (MSDS) for NALCO 2593

Strengths of this SDS (Good Compliance)

• Clear eye hazard warning (Category 1 is correct).
• Adequate ecological data.
• Specifies exact incompatible materials.

Emergency Response Procedures

Section 11: Toxicological Information

13. Disposal Considerations (Section 13)

• Do not dispose of undiluted product into surface waters or sewers without treatment.
• Preferred method: Neutralize to pH 6–9, then coagulate/precipitate phosphonate with lime or ferric salts. Dispose in a permitted industrial landfill or via incineration at a licensed facility.
• Empty containers: Triple rinse with water; recycle or dispose as non-hazardous waste if not contaminated. Follow RCRA (40 CFR 261). Note: NALCO 2593 is not listed as a "characteristic hazardous waste" (D002 – corrosive) if neutralized.

Below is a draft summarizing the critical safety and technical data for this product. Product Identification and Composition Product Name: Nalco 2593 Primary Active Ingredients: 5-Chloro-2-methyl-4-isothiazolin-3-one: 2-Methyl-4-isothiazolin-3-one: Inert Ingredients: Physical Form: Hazard Identification Classification: Classified as due to its corrosive and toxic nature. Health Hazards: Corrosive: Can cause severe skin burns and eye damage. Sensitization: May cause an allergic skin reaction. nalco 2593 msds

: Block drains and contain the leak using absorbent materials (sand or earth). Neutralization Material Safety Data Sheet (MSDS) for NALCO 2593