Skip to content
Close

Asmaco Spray Paint Msds Work -

Comprehensive Guide to Asmaco Spray Paint MSDS: Safety, Usage, and Technical Insights

Section 3: Composition / Information on Ingredients

Asmaco does not always disclose proprietary ingredient percentages, but an MSDS lists the hazardous substances above regulatory cutoff limits. Asmaco Spray Paint Msds

According to its SDS, Asmaco spray paint is classified as an Extremely Flammable Aerosol (Category 1). Key hazards identified include: Comprehensive Guide to Asmaco Spray Paint MSDS: Safety,

How to Obtain the Official Asmaco Spray Paint MSDS

  1. Check the can label – A website or QR code is often printed.
  2. Contact your supplier – The retailer or distributor is required by law to provide the SDS upon request.
  3. Visit the manufacturer’s website (if Asmaco is a brand of a larger group like Berger Paints, Nippon Paint, or a local manufacturer – verify the actual producer).
  4. Request in writing – Under GHS, suppliers must send the SDS within 24–48 hours.
  • UN Number: UN1950
  • Proper Shipping Name: Aerosols, flammable
  • Transport Hazard Class: 2.1 (Flammable gas)
  • Packing Group: None (but special provisions apply)
  • Labels required: Flammable gas + Limited quantity (if < 1L per can)
  • H222: Extremely flammable aerosol.
  • H229: Pressurized container: may burst if heated.
  • H319: Causes serious eye irritation.
  • H336: May cause drowsiness or dizziness.

Chronic Toxicity: Contains substances like Toluene, which are suspected of damaging the unborn child or impairing fertility. Chemical Composition Check the can label – A website or

Health Hazards: Vapors may cause drowsiness or dizziness (STOT SE 3). Direct contact can lead to skin dryness, cracking, and serious eye irritation.

  1. Empty cans: Allow to completely empty by spraying onto cardboard or waste material until only propellant discharges. Then recycle as scrap metal (check local rules – some centers accept “empty” aerosols).
  2. Partially full cans: Dispose as hazardous waste through licensed waste collector.
  3. Liquid residue: Absorb with inert material and containerize.